产品详细信息

Vin (Min) (V) 2.7 Vin (Max) (V) 6 Vout (Min) (V) 0.4 Vout (Max) (V) 3.3 Iout (Max) (A) 6 Iq (Typ) (uA) 1.75 Switching frequency (Min) (kHz) 1500 Switching frequency (Max) (kHz) 3000 Features Enable, Fixed Output, Forced PWM, Frequency Synchronization, I2C/PMBus, Light Load Efficiency, Over Current Protection, Power Good, Soft Start Fixed, Wettable Flanks Package Operating temperature range (C) -40 to 125 Rating Automotive Regulated outputs (#) 1
Vin (Min) (V) 2.7 Vin (Max) (V) 6 Vout (Min) (V) 0.4 Vout (Max) (V) 3.3 Iout (Max) (A) 6 Iq (Typ) (uA) 1.75 Switching frequency (Min) (kHz) 1500 Switching frequency (Max) (kHz) 3000 Features Enable, Fixed Output, Forced PWM, Frequency Synchronization, I2C/PMBus, Light Load Efficiency, Over Current Protection, Power Good, Soft Start Fixed, Wettable Flanks Package Operating temperature range (C) -40 to 125 Rating Automotive Regulated outputs (#) 1
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • 2.7-V to 6-V input voltage range
  • Family of pin-to-pin compatible devices: 6 A, 9 A, 12 A, and 15 A
  • Four output voltage ranges:
    • 0.4 V to 0.71875 V in 1.25-mV steps
    • 0.4 V to 1.0375 V in 2.5-mV steps
    • 0.4 V to 1.675 V in 5-mV steps
    • 0.8 V to 3.35 V in 10-mV steps
  • Output voltage accuracy ±1%
  • 7-mΩ and 4.5-mΩ internal power MOSFETs
  • Adjustable external compensation
  • Resistor-selectable start-up output voltage
  • Resistor-selectable switching frequency
  • Power-save or forced-PWM operation
  • I2C-compatible interface up to 1 MHz
  • Differential remote sensing
  • Optional stacked operation for increased output current capability
  • Thermal warning and thermal shutdown
  • Precise enable input
  • Active output discharge
  • Optional spread-spectrum clocking
  • Power-good output with a window comparator
  • Available in 2.55-mm × 3.55-mm × 1-mm VQFN package with wettable flanks
  • –40°C to 150°C junction temperature, TJ
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • 2.7-V to 6-V input voltage range
  • Family of pin-to-pin compatible devices: 6 A, 9 A, 12 A, and 15 A
  • Four output voltage ranges:
    • 0.4 V to 0.71875 V in 1.25-mV steps
    • 0.4 V to 1.0375 V in 2.5-mV steps
    • 0.4 V to 1.675 V in 5-mV steps
    • 0.8 V to 3.35 V in 10-mV steps
  • Output voltage accuracy ±1%
  • 7-mΩ and 4.5-mΩ internal power MOSFETs
  • Adjustable external compensation
  • Resistor-selectable start-up output voltage
  • Resistor-selectable switching frequency
  • Power-save or forced-PWM operation
  • I2C-compatible interface up to 1 MHz
  • Differential remote sensing
  • Optional stacked operation for increased output current capability
  • Thermal warning and thermal shutdown
  • Precise enable input
  • Active output discharge
  • Optional spread-spectrum clocking
  • Power-good output with a window comparator
  • Available in 2.55-mm × 3.55-mm × 1-mm VQFN package with wettable flanks
  • –40°C to 150°C junction temperature, TJ

The TPS6287x -Q1 is a family of pin-to-pin 6-A, 9-A, 12-A, and 15-A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15-A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x -Q1 family implements an enhanced DCS control scheme that supports fast transients with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5 MHz, 2.25 MHz, 2.5 MHz, or 3.0 MHz, or synchronized to an external clock in the same frequency range.

The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.

The TPS6287x -Q1 is a family of pin-to-pin 6-A, 9-A, 12-A, and 15-A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15-A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x -Q1 family implements an enhanced DCS control scheme that supports fast transients with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5 MHz, 2.25 MHz, 2.5 MHz, or 3.0 MHz, or synchronized to an external clock in the same frequency range.

The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.

下载

您可能感兴趣的相似产品

open-in-new 比较产品
功能与比较器件相同且具有相同引脚。
NEW 预发布 具有快速瞬态响应的汽车类 2.7V 至 6V 输入、9A 可堆叠同步降压转换器

Higher current option, provides flexiblity to increase current based on application need without changing the layout.

功能与比较器件相同但引脚有所不同。
NEW 正在供货 采用 2mm x 3mm 可湿性侧面 QFN 封装的汽车类 2.75V 至 6V、6A 降压转换器

Without I²C interface and is not stackable.

技术文档

star = 有关此产品的 TI 精选热门文档
未找到结果。请清除搜索,并重试。
查看全部 4
类型 项目标题 下载最新的英语版本 日期
* 数据表 TPS6287x-Q1 2.7-V to 6-V Input, 6-A, 9-A, 12-A, 15-A, Automotive, Stackable, Synchronous Step-Down Converters with Fast Transient Response 数据表 04 May 2022
应用手册 Benefiting from Step-Down Converters with an I?C Communication Interface (Rev. A) 04 May 2022
功能安全信息 TPS6287x-Q1 Functional Safety FIT Rate, FMD and Pin FMA 02 May 2022
技术文章 29 Mar 2019

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice?

PSpice? for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence? 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 引脚数 下载
(RXS) 16

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持与培训

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持

视频